Step
1.
Click on your Mac Hard Drive. |
Step
2.
Click on the Mac Assistants folder. |
Step
3.
Click on the Internet Setup Assistant. |
Step
4.
Internet Setup Assistant appears. Simply
click Yes to continue... |
Step
5.
The next screen will ask if you already
have an Internet account; click Yes to
continue... |
Step
6.
This screen asks you if you have the
information needed to set up your account.
Click the arrow in the bottom right to
move on to the next step...
Note that for a typical dialup account, it
is not necessary for you to know the DNS
server nor the IP address as these will be
setup to be “server assigned” later in
the configuration process. |
Step
7.
This screen will ask for what name you
would like to call your connection, enter
PennSmart, and then select Modem and click
the arrow to continue... |
Step
8.
The Macintosh OS usually selects the modem
already installed on your system. If you
wish to choose a different modem, select
it from the drop down list, as well as the
port you wish to use. Click the arrow to
move to the next step... |
Step
9.
This step will ask you for your local
dialup number; enter it without the area
code unless you have 10-digit dialing in
your area.
It will also ask for your Login ID.
(example: ccp999@vhst.net). Your login ID
MUST be all lowercase letters. Click the
arrow to move to the next step... |
Step
10.
This screen asks you if you require a PPP
connect script when you log on. Select no
and click the right arrow to continue... |
Step
11.
This step asks if you if there is a
specific Static IP address for your setup,
select No and click the arrow to continue
to the next step... |
Step
12.
This screen asks you for your Domain Name
Servers (DNS). You can leave this blank
and your DNS servers will be assigned
automatically when you connect to
PennSmart.
In the Domain Name box you can enter
pennsmart.com. The domain name is
optional. Click the right arrow to move to
the next step... |
Step
13.
This screen asks for your e-mail address
and password. Please enter your e-mail
address (example: johnsmith@pennsmart.com).
You must enter this information in all
lower case letters. Your e-mail password
must also be in all lower-case letters.
Click the right arrow to move to the next
step... |
Step
14.
This screen is asking for the incoming
(POP3) and outgoing (SMTP) mail server
names. In the first field, enter just your
entire email name (example: johnsmith@pennsmart.com).
In the second field, enter the PennSmart
mail host server which is
mail.pennsmart.com . Click the right arrow
to move to the next step... |
Step
15.
This step is looking for the News server
name. Leave the field blank and click the
right arrow... |
Step
16.
This step is asking if you are using a
proxy server. Unless you are using a proxy
server, or if you have no idea what a
proxy server is, then select No and click
the right arrow to move to the next
step... |
Step
17.
This is the final step in setting up your
internet connection for PennSmart. Take
the check mark out of "Connect when
finished" and then click on "Go
Ahead" to complete your setup. |
| These
instructions are informational only. No
representation is made or warranty given
as to their content, phone line conditions
or user's system configuration. User
assumes all risk of use. PennSmart and its
suppliers assume no responsibility for any
loss or delay resulting from such use. |
